Micrel Creates 1-Square Millimeter Dual-Input, Push-Button-Reset IC With Extended Setup Delay Times for Generating Hard Resets
- New IC Protects Against Accidental Resets While Satisfying Size and Power Demands for a Variety of Consumer Products
“The MIC2782 was designed expressly for consumer product manufacturers seeking to virtually eliminate the possibility of accidental hard resets,” stated Brian Hedayati, marketing vice president for the Analog business unit at Micrel. “The dual-input MIC2782 offers an elegant, flexible solution in less than 1 square millimeter while limiting the supply current to 2.2mA. This makes the device eminently suitable for space-constrained, power-sensitive applications such as Smart Phones and tablets.”
The MIC2782 generates a reset pulse for a reset timeout period of 0.5s, 1s or 2s, after both push-button inputs have been held low for a selectable setup period of 6s, 8s, 10s, or 12s. The device also features a second output that immediately asserts if both push-button inputs have been asserted, and deactivates if one or both inputs are released. The MIC2782 provides 65kOhm pull-up resistors on the push-button inputs. Designers can tie both push-button inputs together if they desire a single push-button input. Outputs are open-drain and can sink 0.5mA of current from a 1.5V supply. The MIC2782 operates over the 1.5V to 5.5V supply voltage range, consuming just 2.2mA of supply current at 3.3V. It is available in a space saving, 6-bump, 0.4mm pitch, 0.8mm x 1.2mm x 0.525mm Wafer Level Chip Scale Package, and operates over the -40degC to +85degC temperature range.
About Micrel, Inc.
Micrel, Inc. is a leading global manufacturer of IC solutions for the worldwide analog, Ethernet and high-bandwidth markets. The Company's products include advanced mixed-signal, analog and power semiconductors; high-performance communication, clock management, Ethernet switch and physical layer transceiver ICs. Company customers include leading manufacturers of enterprise, consumer, industrial, mobile, telecommunications, automotive, and computer products. Corporation headquarters and state-of-the-art wafer fabrication facilities are located in San Jose, CA, with regional sales and support offices and advanced technology design centers situated throughout the Americas, Europe and Asia. In addition, the Company maintains an extensive network of distributors and reps worldwide. Web: http://www.micrel.com.
Website: http://www.micrel.com
Contact
Julieanne DiBene
Marketing Communications
1-408-474-1276
Send Email
This news is a press release provided by Micrel Inc.. Korea Newswire follows these editorial guidelines.
-
2014년 6월 13일 11:40